CNC Sofa Fabric Cutting Machine 1600x3000mm Auto-Feeding – OEM Available

In-House Design Control — Every 1625 cutting table is configured in our Jinan factory with tool head and vacuum zoning matched to your specific fabric weight and layer count before the order is finalized.

Technical Specifications

Application Suitability

Why Fabric Thickness Dictates the Entire Machine Configuration

A cutting table specified only by bed size will fail the moment your composite fabric is thicker than the sample used for the quote.

I walked into a workshop last year where a sofa fabric producer was running what should have been a straightforward multi-layer cutting job, but the edges were fraying and the machine was stalling mid-pass. The material was nearly double the thickness they had tested on during the initial demonstration. The oscillating knife head they had been sold could not generate enough downward pressure, and the vacuum zoning was too coarse to hold small pattern pieces flat. We swapped the tool head, adjusted the vacuum table segments, and the same machine frame performed as it should have from day one. [NEED_CITE: material hold-down requirements for multi-layer textile cutting]

This is why we insist on receiving your actual production material before confirming any tool head or vacuum table specification. The 1625 platform is not a single fixed configuration — it is a cutting method that gets matched to your fabric density, layer count, and edge quality requirement.

Matching the Tool Head to Your Fabric Behavior

Not all fabrics respond the same way to a blade. Knits stretch under pressure, woven technical textiles fray if the oscillation frequency is wrong, and plush materials compress so much that a standard drag knife leaves crushed edges. The 1625 offers oscillating knife, driven rotary knife, kiss cutting, and pneumatic knife options so that each material gets the cutting action it needs rather than a compromise. A CNC oscillating knife cutting machine manufacturer that only offers one tool head forces you to adapt your material to the machine, not the other way around.

Vacuum Table Zoning for Small Pattern Pieces

When you cut automotive seat covers or garment panels, many of the pieces are small and irregularly shaped. A vacuum table with large zones will lose suction on those pieces, allowing fabric to lift during high-speed passes and creating jagged edges or missed cuts. The aluminum bellows vacuum table on the 1625 provides full-surface adsorption with fine zoning, holding even narrow strips and small gussets firmly in place through the entire cutting cycle. [NEED_CITE: vacuum table zoning standards for precision textile cutting]

What the Speed and Accuracy Numbers Actually Mean on the Floor

The 0-2000 mm/s cutting speed range and ±0.1 mm positioning accuracy are not marketing figures — they define what you can realistically run in production. At the upper speed range, the PLC control panel and servo motors (available with Panasonic, Delta, or Dorna) must maintain synchronization so that the oscillating knife does not lag on tight corners. That ±0.1 mm accuracy is what keeps nested pattern pieces within tolerance so that downstream sewing operations do not have to trim excess. The 9KW vacuum pump ensures the aluminum table stays flat and the material stays pinned even when cutting at higher feed rates across the full 1600*2500mm work area.

The Cost of Getting the Configuration Wrong

When the wrong tool head meets a thick composite fabric, the result is not just slow cutting — it is scrap. Ragged edges mean the piece goes to waste, and crushed foam layers underneath a sofa cover mean the upholsterer rejects the entire panel. If the vacuum zoning is too broad, small pieces shift during cutting, and the nesting software’s material yield calculations become meaningless because the actual cut pieces are out of tolerance. These problems do not show up on a specification sheet; they only appear on your production floor, after the machine has been paid for and installed. [NEED_CITE: fabric cutting waste causes in upholstery production]

Why Buyers Source This Platform Directly

Our Jinan facility handles both the knife cutting and the table construction under one roof, which means when a buyer requests a specific vacuum zoning layout for their automotive seat fabric, the modification is designed and built here rather than outsourced. The software compatibility is confirmed before the order — if your existing nesting workflow exports PLT, DXF, AI, or PDF, we verify import and run a test file before the machine ships. Voltage and control language are set to your destination market specification, so a buyer in Eastern Europe receives a 380V machine with Russian-language controls, and one in Southeast Asia gets 220V with English. Every machine leaves with a factory test record cut on the buyer’s own material, not a generic demo sample.

Documentation & Verification

• Machine specification sheet matching your confirmed tool head and table configuration
• Electrical schematic with your destination voltage and plug type verified before shipment
• Sample cutting report on your actual fabric with edge quality and thickness documentation
• Tool head and vacuum zone configuration list specific to your production material
• PLC control language confirmation matching your operator requirements
• Packing photographs showing crating and component protection before dispatch

Installation, Commissioning & Support

• 9KW vacuum pump requires a dedicated circuit separate from the main servo drive supply
• Machine dimensions of 330021001350 mm need clear floor space plus operator access on three sides
• Fully assembled delivery with on-site leveling and vacuum table flatness verification
• PLC control panel parameter setup calibrated to your specific fabric type and layer count
• Servo motor tuning and oscillating knife stroke adjustment validated during commissioning
• Spare parts list covering blades, vacuum seals, and belt drives for your configuration

What We Need to Move Forward

Send us the exact fabric type, thickness, and the number of layers you plan to cut in a single pass. Tell us your daily panel output target and the dimensions of your largest pattern piece so we can confirm the 1600*2500mm bed covers your nesting layout. Confirm your workshop voltage and frequency, and whether your operators need a specific control language. If you have an existing nesting software workflow, share a sample file so we can verify format compatibility before any commitment is made.

Frequently Asked Questions

Q: How do you determine which tool head is right for my fabric?
A: We run your actual material on the 1625 platform, testing oscillating knife, driven rotary, and kiss cutting options against your required edge quality and layer count. The cutting report documents which tool head produces clean edges at production speed without crushing or fraying, and that configuration is locked into your order specification.

Q: Can the machine voltage and control language be set for my country?
A: Yes. The 1625 supports 110V, 220V, and 380V configurations, and the PLC control panel can be set to English, Russian, Italian, Chinese, or other languages on request. Voltage and language are confirmed in writing before production begins so there are no surprises at commissioning.

Q: Will my existing nesting software files work with this machine?
A: The system accepts PLT, DXF, AI, and PDF file formats. Before you place an order, we ask you to send a sample file from your nesting workflow so we can verify import, run a test cut, and confirm that the machine reads your layer assignments and tool paths correctly.

Q: What happens during the sample cutting process before I commit?
A: You send us a roll or sheet of your production fabric. We configure the 1625 with the recommended tool head and vacuum zoning, run your pattern at production speed, and send you a documented cutting report showing edge quality, dimensional accuracy, and cutting speed achieved on your specific material.

Q: What does installation and after-sales support include?
A: The machine ships fully assembled. Our team handles on-site leveling, vacuum calibration, servo tuning, and operator training on your specific fabric. You receive a spare parts list covering blades and vacuum seals, and our support team remains available for parameter adjustments as your material range evolves.