Fabric Leather PVC CNC Knife Cutting Machine – OEM Available

Factory-Engineered Frame and Motion — Every RT-D2516/RT-S2516 chassis is welded, tempered and finish-machined in our Jinan facility before the servo gantry is ever mounted.

Technical Specifications

Application Suitability

Why "Working Area First" Kills the Production Line

Cutting depth is decided by the tool head and material stack, not by the footprint of the bed.

When a buyer specifies a flatbed CNC knife cutting machine only by table size, the conversation skips past the part that actually stalls the line. A 2500 × 1600 mm envelope looks generous until the shop tries to push a 40 mm lay-up of fiber-reinforced PVC composite through a standard oscillating head. The knife deflects, the edge delaminates, and the vacuum zoning cannot hold the small off-cuts flat. That machine then sits idle while the floor crew hand-trims the rejects [NEED_CITE: typical knife deflection on fiber-reinforced laminates].

The Frame Is Where Accuracy Lives or Dies

The RT-D2516 and RT-S2516 chassis start as thick-walled seamless steel tube, welded into a single box structure and put through high-temperature tempering to bleed off welding stress. The entire bed is then finish-machined on a CNC machining center, so the linear guide seats and the vacuum table datum sit in the same tolerance stack. For a CNC knife cutting machine manufacturer, owning that machining step means the gantry squareness is not left to a sub-supplier’s fixture.

Motion Components That Match the Cut

A Hiwin linear rail carries the carriage, while a synchronous belt and ball screw handle the long and short axes respectively. Servo options are Delta or Panasonic, both IP67 rated against coolant mist and fiber dust that drifts into the carriage during textile cutting [NEED_CITE: IP67 ingress protection definition]. Translational velocity is listed up to 2000 mm/s, but the number that matters on the shop floor is the 200 – 800 mm/s cutting window, which must be matched to material thickness by the operator.

Reading the Specs That Actually Decide Edge Quality

The "≤ 100 mm cutting thickness" headline only holds when the material is low-density foam or soft sponge; dense rubber gasket stock or fiberglass composite will cap the practical depth far lower. The Swiss imported tool head combines vibration full cutting, half cutting and cursor location in one holder, so the operator can kiss-cut a printed vinyl contour and then through-cut the carrier sheet without a tool change. Vacuum zoning on the magnesium-aluminum PVDF-coated platform is offered in integrated or split-box layout — split box is the option that keeps small automotive mat off-cuts from lifting under the knife.

The Hidden Cost of Skipping the Sample Cut

Sending a roll of your actual production material before the order is locked removes the guesswork on tool head, blade frequency and vacuum pull. Without that step, a shop cutting layered non-woven felt may receive a pneumatic knife that crushes the top ply, or a vacuum table zoned for large panels that leaves the corner pieces floating during the final pass. Both faults only show up once the machine is under production pressure [NEED_CITE: vacuum hold-down requirements for flexible multi-layer stacks].

Why Sourcing Directly From the Build Floor Matters

The Jinan facility handles design, welding, machining, assembly and factory testing under one roof, so the buyer is evaluating an engineering team, not a trading catalogue. Every tool head, voltage rating and software language is confirmed on the purchase drawing before metal is cut. OEM buyers can request custom control panel language, alternative plug standards and private-label documentation without routing changes through a third party. Sample cutting reports ship with the quotation, so the buyer sees the edge profile on their own stock before committing to a container load.

Documentation & Verification

• Machine specification sheet locked to the agreed tool head and vacuum layout
• Electrical schematic confirming 380 V ±10 % and destination plug type
• Factory test record run on buyer-supplied fabric or composite sample
• CE declaration package for EU machinery directive markets
• Operation manual translated into English, Russian, Italian or custom language
• Spare parts list with blade, belt and silencer sponge part numbers

Installation, Commissioning & Support

• 9 kW main plus 7.5 kW pump demands a dedicated three-phase breaker
• 3450 × 2300 × 1250 mm footprint needs level concrete floor, no pit required
• Machine ships fully assembled; gantry and vacuum pump bolt on site
• First-run servo tuning and vacuum zoning map set during commissioning visit
• Operator training covers PLT/DXF import, nesting and auto typesetting workflow
• Wearing parts kit includes Swiss knife blades and synchronous belt sections

What We Need From Your Side to Quote

Send the material data sheet, the thickest lay-up you intend to run, and a daily panel count target so we can match the tool head and conveyor option. Confirm your local voltage, frequency and plug standard, plus the control panel language your operators prefer. If you run a specific nesting software upstream, share a sample DXF or AI file so we verify the import chain before the order is written.

Frequently Asked Questions

Q: How do you select the tool head for my specific fabric or composite?
A: We ask for a physical sample of your production material, including the thickest lay-up. The sample is test-cut in Jinan with oscillating, pneumatic, drag and Swiss heads, and the report shows edge finish, cutting speed and blade wear. Only the head that passes on your stack goes into the specification.

Q: Which voltage, plug and language options can I order?
A: The standard drive is 380 V ±10 %, but the transformer and plug can be specified for 220 V, 415 V or other three-phase markets. Touch screen language ships in English, Russian, Italian or Chinese by default, and custom languages are added to the HMI before dispatch.

Q: Can I send my material for a sample cut before placing the order?
A: Yes — sample cutting is a fixed step in our sales process. Send a roll or sheet of your actual production stock, and we return a cutting report showing edge quality, achievable speed and recommended blade. No order proceeds until you sign off the sample result.

Q: What customization is available for distributors and importers?
A: Distributors can specify private-label paint, custom HMI branding, localized documentation and regional plug/voltage packages. OEM engineering changes to the vacuum zoning map, conveyor length or safety guard layout are handled by the in-house design team without a trading middle layer.

Q: What documentation ships with the machine?
A: Every shipment carries the signed specification sheet, electrical schematic with voltage confirmation, factory test record on buyer material, CE declaration where applicable, operation and maintenance manual, software licence note and a spare parts list with reorder part numbers.