Flat Bed Cutter for Packaging – OEM Available

Configured by material, not by catalog — the RT-D2516/RT-S2516 is matched to your sheet type and daily cut volume before the quote is issued, avoiding the common trap of a machine that fits the table but fails on the stock.

Technical Specifications

Application Suitability

When "Working Area" Is the Only Spec That Gets Discussed

Buyers often start with table size and stop there, only to discover on day one that the stock thickness exceeds what the configured tool head can handle. The RT-D2516/RT-S2516 is specified from the material outward, not from the footprint inward. A 1600 × 2500 mm bed is useless if the oscillating knife stalls on 8 mm grey board or the vacuum zoning cannot hold small sticker sheets flat. As a CNC flatbed digital cutting machine manufacturer, we match knife type, vacuum zone layout, and conveyor or fixed table to your actual production mix before the order is finalized [NEED_CITE: flatbed cutting configuration best practices for packaging and flexible materials].

How the Cutting Head Meets the Material

The Swiss imported multifunctional knife on this CNC flatbed digital cutting machine handles vibration full cutting, half cutting, and cursor location in a single head. For corrugated carton sample work, the vibration full cut slices through multi-ply board without crushing the flute structure. Half cutting scores crease lines for folding without penetrating the liner. Cursor location picks up fiducial marks on printed sticker sheets so the cut path aligns with the graphic, reducing misregister waste on short runs.

Transmission Accuracy and What It Means on the Table

Yaskawa digital servos paired with Hiwin linear rails and an imported ball screw deliver repeated accuracy of ≤ 0.1 mm across the full 1600 × 2500 mm travel. In carton sample making, that tolerance keeps crease lines aligned with cut edges across a nested sheet of mixed box sizes. For garment leather cutting, it means the pattern piece you cut at position one matches the piece cut at position forty, which matters when those pieces are stitched together downstream [NEED_CITE: tolerance stacking in multi-piece garment assembly].

Reading the Spec Sheet Beyond the Headline Numbers

The 7.5 kW vacuum pump and Germany-imported conveyor belt create an auto-feeding workflow: sheet stock is pulled from a roll or stack, held flat by vacuum, cut, and advanced for the next cycle without manual repositioning. The 9 kW rated power covers the servo drives, vacuum pump, and head motor simultaneously, so the machine does not trip breakers when the vacuum pump kicks in during a heavy cut. Translational velocity reaches 800–1200 mm/s for rapid repositioning between cut paths, while actual cutting speed ranges from 200 to 800 mm/s depending on material density and thickness.

The Hidden Cost of Skipping the Sample Cut

When a buyer commits to a configuration without seeing their own material cut first, two failures tend to surface after delivery. First, edge quality falls short — crushed corrugated flutes, frayed fabric edges, or delaminated composite leather — because the knife frequency and downward pressure were guessed rather than tested. Second, vacuum zoning proves inadequate for the smallest piece in the nest, and parts lift during high-speed cuts, ruining the sheet and risking the knife tip. A sample cutting report on the buyer’s own stock eliminates both surprises before the machine ships [NEED_CITE: pre-shipment sample testing in CNC cutting procurement].

Why Source This Flatbed Cutter From the Factory That Builds It

Our in-house design team covers both knife and laser cutting technologies, so the recommendation is based on what the material needs rather than what one machine type can force. The RT-D2516/RT-S2516 is built in the same Jinan facility where it is designed, meaning configuration changes — a different knife holder, additional vacuum zones, conveyor length adjustment — are handled on the production floor, not negotiated through a trading desk. Electrical schematics are confirmed against destination voltage before the cabinet is wired. Software license and HP-GL file format compatibility are verified with the buyer’s existing nesting or CAD workflow. CE documentation accompanies the shipment where applicable.

Documentation & Verification

• Machine specification sheet listing every configured tool head and table option
• Electrical schematic with voltage and plug type confirmed for destination market
• Sample cutting report on buyer’s own material with edge photos and cycle times
• Tool head and vacuum table configuration list matched to production volume
• Software license and HP-GL file format compatibility note included pre-shipment
• Operation and maintenance manual with spare parts list for consumables

Installation, Commissioning & Support

• 3450 × 2300 × 1250 mm footprint requires a level concrete floor with clearance for auto-feed conveyor extension
• 9 kW rated power plus 7.5 kW vacuum pump need dedicated circuits at confirmed 380V ± 10% supply
• Machine arrives in sections; vacuum table and gantry are assembled and aligned on site
• First-run commissioning includes calibration of Yaskawa servos and Hiwin rail alignment across the full bed
• Operator training covers HP-GL file import, knife depth setting, and vacuum zone activation
• Consumable spare kit includes replacement Swiss knife blades and vacuum seals for initial operation period

What We Need to Configure Your Machine

To recommend the correct knife type, vacuum layout, and feeding method, we need your material type, thickness range, and maximum sheet size. Daily cut volume tells us whether a conveyor auto-feed or a fixed table suits your workflow. Destination voltage, frequency, and preferred control language are confirmed before the electrical cabinet is built. If your stock is printed, send a sample sheet so we can test CCD contour tracking at your target speed.

Frequently Asked Questions

Q: How do I choose between oscillating knife, drag knife, and creasing wheel for my material?
A: Oscillating knives suit thicker, fibrous materials like corrugated board and composite leather where a vibrating stroke prevents dragging. Drag knives work on thin vinyl and sticker films. Creasing wheels score fold lines on carton stock without cutting through. The RT-D2516/RT-S2516 multifunctional head accommodates these tool options, and the correct choice is confirmed during the sample cutting test on your own material.

Q: Can the CCD camera track printed marks on sticker sheets at production speed?
A: CCD contour recognition depends on mark contrast, size, and camera frame rate relative to sheet advance speed. We test your actual printed stock to verify that the cursor location function picks up fiducial marks reliably before the configuration is locked in, preventing misregister issues that only appear once the machine is running daily output.

Q: What electrical details must be confirmed before shipment?
A: Voltage, frequency, plug type, and control panel language are confirmed against your facility’s supply and operator preference. The standard 380V ± 10% configuration can be adjusted. An electrical schematic is sent for approval before the cabinet is wired, ensuring the machine matches local standards upon arrival.

Q: Will the vacuum table hold small packaging pieces without lifting?
A: The 7.5 kW vacuum pump is zoned across the flat working table so that only the area under active cutting draws suction. Zoning prevents small carton or sticker pieces from drifting during high-speed head travel. The zone layout is matched to your typical nest layout and confirmed during the pre-order sample test.

Q: What does the sample cutting report cover before I commit to the order?
A: The report documents material type, thickness, knife tool used, cutting speed achieved, edge quality photographs, and any vacuum hold-down observations. It serves as the baseline for finalizing the tool head configuration, vacuum zone map, and feed method on your RT-D2516/RT-S2516 before production begins.