Factory Supply Paper Board Die Cutting Machine 100m/min 11kW

In-House Design Integration — Both oscillating knife and vacuum platform engineered under one roof, ensuring the cutting method matches your paperboard grade rather than forcing a generic setup.

Technical Specifications

Application Suitability

Why Board Thickness Claims Mislead Packaging Buyers

A cutting depth figure means nothing without the board grade and moisture content behind it.

I recall a carton sample shop that specified a machine based solely on working area. When their high-moisture grey board came in during the rainy season, the standard oscillating knife produced ragged edges across every cut. The issue was not the CNC oscillating knife cutting machine manufacturer — it was the tool head and feed rate mismatch for that specific material condition. Buyers often discover these gaps only after the machine lands on their floor and the first real production run fails. That is why our protocol now requires sample cutting on the buyer’s actual stock before any configuration is finalized [NEED_CITE: material moisture impact on cutting edge quality in paperboard processing].

Matching the Knife System to Your Packaging Substrate

The Swiss imported oscillating knife on this unit handles full cutting, half cutting, and cursor location within a single head. For corrugated board, full cutting at high frequency slices through fluted layers without crushing the profile. Half cutting is critical for kiss-cut applications on sticker sheets where the backing liner must remain intact. The distinction matters because many producers run both carton and label jobs on the same table, and switching between tasks should not require a full tool head swap.

Vacuum Zoning for Small-Format Packaging Components

The 7.5 kW vacuum pump paired with the aluminum alloy honeycomb platform addresses a common failure point: small die-cut parts lifting off the table during the final cut pass. When cutting nested sticker arrays or small carton flaps, the vacuum zones must track the cutting head to maintain hold-down force precisely where the knife exits the material. A flat vacuum field across the entire 1600 × 2500 mm bed wastes suction on empty areas and starves the active cutting zone [NEED_CITE: vacuum zoning principles in CNC flatbed cutting tables].

What the Specs Mean on the Shop Floor

The ≤0.1 mm repeated accuracy is a function of the imported linear guide and ball screw transmission working against the welded steel frame. After high-temperature stress relief treatment, the frame resists the micro-deflections that accumulate during long cutting runs. The 800–1200 mm/s translational velocity governs non-cutting moves — how fast the head repositions between cut paths — while actual cutting speed of 200–800 mm/s depends on whether you are slicing through 2 mm vinyl or 15 mm corrugated board. The HP-GL instruction system means your existing CAD nesting software can export cut paths without an intermediate conversion step, which eliminates a frequent bottleneck in sample-making workflows.

The Cost of Skipping Material-Specific Configuration

Choosing a machine based on bed size alone, then discovering the tool head cannot handle your foam density or board moisture content, leads to weeks of downtime while sourcing replacement knives and recalibrating feed rates. Incorrect vacuum zoning causes small parts to shift mid-cut, producing scrap that accumulates silently across a production shift. When the control language and voltage are not locked before shipment, the machine arrives with a 380V three-phase requirement that does not match a workshop wired for local single-phase supply, delaying commissioning by days [NEED_CITE: industrial voltage standards and phase requirements by region].

Why Buyers Source This Equipment Here

The design team and core factory operate under one roof, so the knife tooling and vacuum table configuration can be adjusted together rather than sourced from separate vendors. Every configuration ships with a sample cutting report run on the buyer’s own material, confirming edge quality before the crate closes. Voltage, plug type, and control panel language are confirmed against the destination market during the order stage, not assumed. The HP-GL compatibility is verified against your specific CAD/CAM workflow before production begins. CE documentation is prepared where applicable, and the electrical schematic accompanies the machine so local electricians can wire the dedicated circuit correctly on arrival [NEED_CITE: CE machinery directive compliance documentation].

Documentation & Verification

• Machine specification sheet listing confirmed tool head and vacuum configuration for your material
• Electrical schematic with voltage and phase matching your facility supply
• Sample cutting report run on your actual paperboard grade and sticker stock
• Tool head and table configuration list specifying knife type per application
• Software licence and HP-GL file format compatibility note for your nesting system
• Spare parts list covering consumable knives, belts, and vacuum seals

Installation, Commissioning & Support

• Dedicated 380V ±10% three-phase circuit required for the 9 kW rated load and 7.5 kW vacuum pump
• Machine footprint of 3450 × 2300 mm requires level concrete floor with clearance for material loading on all sides
• Frame arrives as single welded unit; vacuum table and gantry are assembled and aligned on site
• First-run commissioning includes knife depth calibration against your specific board thickness and density
• Operator training covers HP-GL file import, vacuum zone control, and tool head changeover procedures
• Consumable knife blades and vacuum table seals included in the initial spare parts kit

Preparing Your Inquiry

To specify the right configuration, tell us the exact board grades and thicknesses you run most frequently, including any coated or laminated stock. Provide your facility voltage and frequency, and note whether your workshop uses a dedicated circuit or shares a bus with other equipment. Let us know which CAD or nesting software you currently use so we can confirm HP-GL export compatibility before quoting. If you produce both carton samples and kiss-cut labels, describe the volume split so the tool head package covers both workflows without compromise.

Frequently Asked Questions

Q: How do I confirm the machine can cut my specific board grade cleanly?
A: We run a sample cutting test on your actual material before the order is finalized. The report documents edge quality, cutting depth, and knife configuration used. This eliminates the guesswork of matching oscillating knife frequency and feed rate to your board density and moisture content. You approve the sample result before the machine enters production.

Q: Can the voltage and control language be matched to my local requirements?
A: Voltage is confirmed at order stage to match your facility supply within the 380V ±10% range, and plug type is specified for your market. The control panel language is set before shipment from available options including English, Russian, Italian, and Chinese. The electrical schematic ships with the machine for your local electrician.

Q: Will the vacuum table hold small sticker parts during high-speed cutting?
A: The aluminum alloy honeycomb platform is divided into zones that follow the cutting head. The 7.5 kW vacuum pump concentrates suction on the active cutting area rather than spreading it across the full 1600 × 2500 mm bed. We test hold-down performance on your smallest label format during the sample cutting stage.

Q: Does the control system work with my existing nesting and CAD software?
A: The HP-GL compatible instruction system accepts standard plot file formats from most nesting and CAD platforms. We verify file import and cut path execution using a sample file from your workflow before shipment. If conversion is needed, the compatibility note in your documentation identifies the exact export settings required.