Factory Direct Carton Box Cutting Machine with V-Cutter

In-house knife platform design — The 1625 cutting table is engineered from the frame up for packaging sample workflows, with tool heads and vacuum zoning specified per flute count and board weight rather than adapted from a generic sign-making plotter.

Technical Specifications

Application Suitability

Why the Voltage Question Must Come Before the Price

A 9 kW vacuum pump on 380V three-phase will not start on a 220V single-phase workshop supply, and finding that out on arrival costs weeks of downtime.

I once stood in the assembly bay watching a carton sample cutting table get crated for a Middle East customer. The electrical schematic said 380V three-phase. The destination workshop, it turned out, ran on a different voltage and frequency standard. The machine sat on the customer’s floor for three weeks while a transformer was sourced and installed. That delay was entirely preventable. Every CNC packaging cutting machine manufacturer should confirm voltage, frequency, plug type and servo brand with the buyer before the first bolt is tightened — not after the machine is bolted to the workshop floor [NEED_CITE: voltage and frequency standards by export market].

Tool Heads Matched to Flute Count and Board Weight

A corrugated E-flute sheet behaves very differently under a blade than a BC-flute board or a dense greyboard. The 1625 platform supports oscillating knife, V-groove knife, creasing wheel, kiss cutting tool, driven rotary knife and pneumatic knife on the same gantry. The right CNC packaging cutting machine manufacturer specifies the tool combination based on the buyer’s actual material stack — flute type, board weight, and whether the job calls for through-cutting, kiss-cutting window patches, or scored fold lines.

Vacuum Zoning That Holds Small Samples Flat

Packaging sample making involves cutting multiple small carton blanks from a single sheet. If the vacuum table pulls uniformly across the entire 1600 × 2500 mm surface, small parts near the edges can lift during high-speed knife passes. The aluminum bellows vacuum table on this unit provides full-surface adsorption, and the 9 kW pump generates sufficient hold-down force for both large corrugated sheets and small die-cut samples. Zoning configuration should be confirmed against the buyer’s typical sample size range [NEED_CITE: vacuum hold-down requirements for small die-cut parts at production speed].

Reading the Specs That Actually Matter for Packaging

The ±0.1 mm cutting accuracy across the full working area ensures that scored fold lines and interlocking tab slots align correctly — a tolerance error here means the assembled carton will not square up. Cutting speed is rated at 0–1500 mm/s, though effective speed on corrugated board depends on flute density and knife oscillation frequency. The dedicated packaging box structure design software runs directly on the PLC, eliminating the need to export and re-import DXF files through third-party nesting programs. Supported input formats include PLT, DXF, AI and PDF, which covers the file types most carton designers already use. Servo motors are available from Panasonic, Delta or Dorna, selected based on the buyer’s preference for brand-specific maintenance support in their local market.

What Happens When Configuration Is Skipped

A machine quoted on working area alone often arrives with the wrong tool head for the buyer’s material. An oscillating knife that handles E-flute cleanly may crush BC-flute or leave ragged edges on dense greyboard. Without CCD camera contour recognition confirmed at production speed, printed registration marks on pre-printed carton stock cannot be tracked reliably, and the operator ends up re-cutting manually [NEED_CITE: CCD contour tracking limitations at high feed rates]. A vacuum table without adequate zoning lets small carton blanks drift during cutting, producing out-of-tolerance fold lines that only become visible when the sample is assembled.

Why Source This Platform Here

The 1625 is built by a factory that designs both oscillating knife and laser cutting platforms, so the cutting method is matched to the material rather than forced onto one machine type. Tool head and table configuration are specified per the buyer’s corrugated flute, board weight and daily sample volume. CCD camera positioning is available for printed contour work on pre-printed carton stock. Software compatibility with the buyer’s existing file format and nesting workflow is confirmed before order. Voltage, frequency, control language and servo brand are locked in on the electrical schematic before production begins. Sample cutting on the buyer’s own corrugated or greyboard material is performed and documented before commitment.

Documentation & Verification

• Sample cutting report on buyer’s own corrugated flute and greyboard density
• Electrical schematic confirming voltage, frequency, plug type and servo brand
• Tool head and vacuum table configuration list matched to material stack
• Software licence with DXF, AI, PDF file format compatibility note
• Factory test record documenting cutting accuracy and creasing quality
• Operation and maintenance manual in confirmed control language

Installation, Commissioning & Support

• Requires level concrete floor accommodating 3300 × 2100 mm footprint with clearance for sheet loading
• Dedicated electrical circuit matching confirmed voltage and the 9 kW vacuum pump load
• Machine ships partially assembled; gantry and vacuum table require on-site alignment
• First-run parameter tuning for buyer’s specific flute count and board thickness
• Operator training on PLC interface and packaging structure design software
• Spare oscillating knife blades, creasing wheels and vacuum seals included at dispatch

Before You Request a Quote

Send us the corrugated flute types and greyboard densities you cut most often, along with your typical daily sample volume. Confirm your workshop supply voltage, frequency and whether your existing design files are in DXF, AI or PDF format. If you work with pre-printed carton stock, let us know so we can include CCD camera positioning in the configuration and run a sample cutting on your actual material before the order is finalized.

Frequently Asked Questions

Q: How is cutting thickness verified for different corrugated flutes and greyboard densities before order?
A: We run sample cutting on the buyer’s actual material — the specific flute type, board weight and greyboard density — and document edge quality, creasing depth and fold-line accuracy in a sample cutting report. The ≤ 40 mm thickness rating depends on material density, so verification on the buyer’s own stock is the only reliable confirmation before commitment.

Q: Which tool head combination is specified for V-groove folding cartons versus kiss-cut window patches?
A: V-groove folding cartons require the V-groove knife paired with the creasing wheel for scored fold lines. Kiss-cut window patches use the kiss cutting tool set to a precise depth that cuts the top layer without penetrating the backing. The correct combination is confirmed during the sample cutting stage on the buyer’s actual board stock.

Q: What vacuum zoning options are available to hold small carton samples flat during high-speed cutting?
A: The aluminum bellows vacuum table provides full-surface adsorption across the 1600 × 2500 mm working area. Zoning configuration is specified based on the buyer’s typical sample size, ensuring small carton blanks remain flat at cutting speeds up to 1500 mm/s. The 9 kW vacuum pump delivers sufficient hold-down force for both large sheets and small parts.

Q: Is the packaging structure design software compatible with the buyer’s existing nesting and file workflow?
A: The dedicated software on the PLC accepts PLT, DXF, AI and PDF file formats directly. Before order, we confirm compatibility with the buyer’s existing design and nesting workflow, and provide a software licence with a file format compatibility note. Custom control languages are available to match the operator’s preference.

Q: What voltage, frequency and control language configurations are confirmed before shipment?
A: Voltage options include 110V, 220V and 380V. Frequency, plug type, servo motor brand and control panel language are all confirmed on the electrical schematic before production begins. The buyer signs off on the specification sheet so the machine arrives ready to connect to the local supply without additional transformers or rewiring.