Mini Cutting Plotter 2026 CNC Cutter with CCD Camera – Factory Direct

In-house engineering control — The 1625 CNC oscillating knife cutting table is developed and assembled under one roof, so every tool head selection and motion calibration traces back to the same technical team rather than passing through a trading desk.

Technical Specifications

Application Suitability

Why "Cutting Speed 1500 mm/s" Means Nothing Without the Material Sheet

Real cutting throughput depends on the actual stock you feed, not the maximum traverse rate printed on a brochure.

I have watched buyers compare two machines solely on the speed figure, then wonder why the one rated higher still struggles on double-wall corrugated. The oscillating knife has to push through fiber, and thicker flutes demand slower travel to keep the edge clean. A CNC Oscillating Knife Cutting Machine manufacturer who quotes speed without asking what you cut is quoting an empty number [NEED_CITE: material-dependent cutting speed parameters for oscillating knife systems]. When the test sample arrives at our floor, the first thing we do is run the buyer’s own corrugated grade and measure the actual cycle time on a nested sheet — that is the number that matters for your production planning.

Frame Rigidity and Motion Component Sourcing

The 1625 platform is built on a heavy-duty frame with a precision-ground working surface. For distributors evaluating this unit as an OEM base, the frame construction directly determines how long the machine holds positioning accuracy before realignment is needed. We source servo motors from Panasonic, Delta, or Dorna depending on the buyer’s regional service network, so replacement drives remain obtainable locally rather than requiring an overseas parts order every time a motor reaches end of life.

The CCD Camera Question Importers Must Ask Early

CCD contour recognition is available on this model, and it changes the conversation with end users who cut printed packaging. The camera reads registration marks on pre-printed sheets, allowing the knife path to adjust for stretch or skew introduced during the printing process. However, camera calibration must match the surface reflectivity of the actual material — glossy lamination behaves differently from uncoated kraft [NEED_CITE: CCD camera calibration variables for printed packaging substrates]. We confirm the camera specification against the buyer’s sample stock before locking the build sheet, because retrofitting a different lens or light ring after assembly adds lead time nobody planned for.

Reading the Spec Sheet Like a Production Manager

The 9 kW vacuum pump paired with the aluminum bellows table is sized to hold flat sheets across the full 1600×2500 mm area, but vacuum zoning becomes critical when an end user nests many small carton blanks rather than one large display panel. Without adequate zoning, small parts lift during high-speed oscillating cuts and produce ragged edges or dimensional drift beyond the ±0.1 mm positioning tolerance. The PLC control panel supports file import in PLT, DXF, AI, and PDF, which covers the formats most packaging design studios output — but we verify nesting software compatibility during the pre-order stage so there are no surprises when the first job file arrives. Cutting thickness capacity is listed at ≤ 40 mm, and this figure shifts depending on whether the stock is dense greyboard or compressible foam, so we always validate against the physical sample.

What Happens When the Tool Head Selection Is Wrong

Choosing the wrong tool head for a packaging material does not just produce a bad edge — it creates downstream problems that surface at the customer’s folding and gluing station. A creasing wheel set for B-flute will crush E-flute into an unusable score line, and a pneumatic knife that works on foam will tear through art paper. We have seen return claims traced entirely to a tool head mismatch that could have been caught with a five-minute sample cut [NEED_CITE: tool head selection errors in digital flatbed cutting operations]. That is why the configuration list is confirmed per material before the machine enters production.

Why Importers Source the 1625 Through Our Factory

Our design team handles both knife and laser cutting technology in-house, which means a distributor can consolidate packaging and signage cutting equipment under one factory relationship rather than managing two separate supply chains. Every 1625 unit goes through a factory test on the buyer’s specified material before crating, and the test record ships with the documentation package. Voltage, plug type, and control language are confirmed against the destination market during the order stage — we have shipped units with Italian-language PLC interfaces and 110V wiring for North American workshops in the same production batch. The machine frame and motion components are assembled and inspected at our core facility, giving OEM partners a single point of accountability for build quality.

Documentation & Verification

• Machine specification sheet listing every tool head and table option selected for your material range
• Electrical schematic confirming voltage, frequency, and plug type for the destination country
• Factory test record cut on your corrugated or foam sample with measured cycle times
• CE declaration included with the shipping documentation package
• Operation and maintenance manual matching the installed control language
• Spare parts list cross-referenced with locally available servo motor brands

Installation, Commissioning & Support

• 3300×2100×1350 mm footprint requires level floor with clearance for material loading on both long sides
• 9 kW vacuum pump demands a dedicated circuit separate from the PLC and servo drives
• Machine ships in a single crate; rigging and leveling at final position handled by local technician
• First power-on includes vacuum zoning calibration across the 1600×2500 mm table surface
• Operator training covers tool head changeover between oscillating knife, creasing wheel, and milling tool
• Spare oscillating knife blades and vacuum seals included in the initial parts kit

Preparing Your Inquiry

Before requesting a quote, have your most frequently cut material type, flute grade, and sheet size ready, along with the voltage and frequency standard in your target market. If your end users run printed packaging that requires CCD contour tracking, send a sample of the printed stock so we can verify camera performance on the actual surface finish.

Frequently Asked Questions

Q: What OEM and custom branding options does the factory offer for distributors?
A: We support custom color schemes, logo placement on the machine frame, and branded control panel splash screens for distributor partners. The PLC interface language is configured to your market before shipment, and the operation manual is printed with your company branding. All OEM details are confirmed during the specification review stage so they enter the production schedule from day one.

Q: How is the machine frame and motion system built, and what quality control checks are performed?
A: The frame is welded and stress-relieved before the working surface is precision-ground flat. Linear guides and rack-and-pinion drives are installed and measured for parallelism. Each unit runs a continuous cutting test on the buyer’s specified material, and the positioning accuracy is verified against the ±0.1 mm tolerance before the test record is signed off.

Q: Can voltage, plug type, and control language be customized for my target market before shipment?
A: Yes. The 1625 supports 110V, 220V, and 380V configurations, and we confirm the exact frequency requirement for the destination country during order processing. Plug type is matched to local standards, and the PLC control panel is loaded with the agreed language — English, Russian, Italian, Chinese, or a custom language if required.

Q: What documentation ships with the machine?
A: Every unit ships with a machine specification sheet, electrical schematic, factory test record, CE declaration, operation and maintenance manual, software licence note covering file format compatibility, and a spare parts list. Packing photographs are taken before the crate is sealed and shared with the buyer for logistics reference.

Q: Is a factory visit or third-party inspection supported before order confirmation?
A: We welcome distributor visits to review the assembly floor and testing area, and we accommodate third-party inspection agencies nominated by the buyer. Inspection can cover frame dimensions, motion system alignment, electrical wiring standards, and a witnessed cutting test on the buyer’s sample material.