CNC Cake Box Die Cutting Machine for Cardboard – OEM Available

In-House Design and Production — Every RT-D2516/RT-S2516 frame is welded, tempered, and finished on our own CNC machining center before assembly, giving distributors full traceability from raw steel to final test record.

Technical Specifications

Application Suitability

Why Working Area Alone Does Not Define Cutting Capability

A machine chosen only by bed size often fails the moment real material hits the table.

I have watched buyers specify a flatbed purely on the 1600 × 2500 mm footprint, then discover on day one that the standard oscillating head cannot push through their 8 mm sponge composite leather. The motor stalls, the edge tears, and the entire first batch becomes scrap. A CNC oscillating knife cutting machine factory that understands production will always ask for material type, thickness, and daily volume before confirming the tool head, vacuum zoning, and blade stroke [NEED_CITE: industrial cutting tool selection based on material density and thickness].

When we supplied a packaging line in Dubai, the customer tested die-cutting on grey board but their actual stock was coated white card. Parameters set for grey board produced ragged creases on the coated surface. We now require a physical sample of every buyer’s material before locking the configuration.

Frame Construction That Holds Tolerance Over Years

The RT-D2516/RT-S2516 chassis is welded from thick-walled seamless steel, then high-temperature tempered to relieve internal stress before finishing on a CNC machining center. This sequence prevents the frame distortion that cheaper skip-tempered beds develop after twelve months of vibration. Distributors evaluating a CNC cutting machine manufacturer should request the machining center certificate alongside the weld inspection report.

Motion Components Sourced for Continuous Duty

Linear guides from Taiwan Hiwin and imported ball screws keep the gantry within the ≤ 0.1 mm repeated accuracy window even when the machine cycles at 1200 mm/s translational velocity. Delta servo motors come standard, with Panasonic as an option for buyers whose local service network favors that brand. Both carry IP67 ratings and automatic gain adjustment, suppressing vibration that would otherwise show as chatter marks on thin film or sticker [NEED_CITE: servo motor IP67 rating significance in dust-heavy cutting environments].

Reading the Specs That Matter Most

Vacuum hold-down is where small-part cutting succeeds or fails. The magnesium-aluminum alloy table on the RT-D2516/RT-S2516 receives PVDF fluorocarbon powder spraying plus hard anodic oxidation, producing a flat surface that channels suction evenly. With the 7.5 kW vacuum pump, this coating lets the same blower pull harder on nested gasket pieces than an uncoated aluminum bed would. For CCD contour work, the small camera reads printed mark points to align cuts on pre-printed carton or fabric, while the optional panoramic camera covers full-sheet recognition for larger graphics.

The Hidden Cost of Skipping Configuration Verification

A drag knife specified for thick foam crushes the cell structure instead of slicing it, leaving a compressed edge that fails dimensional checks downstream. A vacuum table with only two zones cannot hold a 50 mm gasket piece while the surrounding sheet lifts, producing a ragged exit cut. Software that does not accept the buyer’s native nesting files forces a manual re-draw every shift, consuming more time than the cutting itself [NEED_CITE: CNC file format compatibility in packaging and textile workflows]. These issues surface only when real material runs, which is why sample cutting on the buyer’s own stock must precede the order.

Why Procurement Teams Choose This Source

In-house design means the same engineering team that specifies the knife stroke also signs off on the frame drawing, eliminating the mismatch between structural rigidity and cutting force. Every RT-D2516/RT-S2516 leaves the core factory with a tool head and table configuration list matched to the buyer’s declared materials. Voltage, plug type, control language, and software license are confirmed before production starts, not after. OEM buyers can request custom working area sizes, tool head arrangements, and branded documentation without going through a trading intermediary. Factory test records include actual cut samples on the buyer’s material, giving distributors evidence their end customers can verify on arrival [NEED_CITE: OEM machinery documentation requirements for international distribution].

Documentation & Verification

• Machine specification sheet listing confirmed tool heads and optional configurations
• Electrical schematic with voltage and frequency matched to destination country
• Factory test record showing cut samples on buyer-supplied material
• CE declaration file covering mechanical and electrical safety scope
• Software license note confirming HP-GL format and nesting file compatibility
• Spare parts list covering blades, vacuum seals, and belt sections

Installation, Commissioning & Support

• 9 kW rated power requires a dedicated 380V ± 10% three-phase circuit with earth leakage protection
• 3450 × 2300 mm footprint needs clear access on three sides for material loading and maintenance
• Vacuum pump 7.5 kW motor must be wired on its own breaker to avoid inrush voltage drop
• First commissioning includes servo gain tuning and vacuum zoning calibration on buyer material
• Operation training covers Swiss knife replacement and CCD camera mark point calibration
• Spare parts kit includes oscillating knife blades, vacuum table seals, and synchronous belt sections

Moving Forward With a Quotation

Share the exact material type, thickness, and maximum sheet size you plan to process. Specify your local voltage and frequency, preferred control language, and whether your workflow requires CCD contour recognition or projection positioning. If you have an existing nesting software or file format, send a sample file so compatibility can be confirmed before the order is placed.

Frequently Asked Questions

Q: What OEM and customization range is available for the RT-D2516/RT-S2516?
A: Voltage, plug, control language, working area, and tool head configuration are all adjustable before production. OEM buyers can request branded documentation, custom color schemes, and software interface localization. Each customization is confirmed on the specification sheet before the build starts, ensuring the machine arrives ready for the destination market.

Q: How is build quality verified before shipment?
A: The frame is welded from thick-walled steel, high-temperature tempered, and finished on a CNC machining center. Quality control checkpoints cover weld inspection, flatness measurement, servo tuning, and a full cutting test on the buyer’s material. A factory test record with cut samples accompanies every shipment.

Q: What documentation comes with the machine?
A: Buyers receive the machine specification sheet, electrical schematic, voltage confirmation, CE declaration where applicable, operation and maintenance manual, software license note, and a spare parts list. OEM distributors can also request configuration lists formatted for their own end-customer handover packages.

Q: How can a distributor evaluate the manufacturer for a long-term partnership?
A: Request a factory visit to inspect frame welding, CNC machining center finishing, and assembly lines. Review the in-house design team’s capability on both knife and laser platforms. Ask for reference contacts in your region and sample test records from previous OEM projects to confirm consistency.

Q: What after-sales support and spare parts supply are available overseas?
A: Wearing parts such as oscillating knife blades, vacuum seals, and synchronous belts ship with the initial spare parts kit. Remote diagnostic support is provided through the control system, and replacement components are dispatched from the core factory. Distributors can stock recommended consumables based on the spare parts list provided at delivery.