V-Cut Carton Box CNC Cutting Machine RT-D2516/RT-S2516 – OEM Available

In-House Design and Core Factory Production — Our engineering team designs and builds both oscillating knife and laser cutting platforms under one roof, allowing buyers to select the cutting method that actually suits their material rather than forcing a single technology onto every application.

Technical Specifications

Application Suitability

Why the Voltage Question Must Come Before the Price Tag

A machine wired for the wrong grid will trip breakers on day one, no matter how well it cuts.

When a CNC oscillating knife cutting machine manufacturer quotes a unit, the voltage and frequency confirmation often sits at the bottom of the checklist. I have watched 380 V 50 Hz machines land in regions running 220 V 60 Hz, only for the servo drives to fault repeatedly during commissioning. The buyer loses weeks waiting for replacement transformers, and the factory ships them at extra cost. Voltage, plug type, and control language should be locked down before the proforma invoice is signed, not discovered when the crate is opened. [NEED_CITE: voltage and frequency standards by export market]

Design and Build Under One Roof

The RT-D2516/RT-S2516 is engineered and assembled in a single facility, which means the design team that specifies the Yaskawa servo and Hiwin rail is the same team that runs the factory test before packing. This vertical integration eliminates the blame-shifting that happens when a trading company sources components from three different workshops. Every CNC oscillating knife cutting machine manufacturer should be able to show you the assembly bay where your unit was built, not just a brochure.

Oscillating Knife Logic for Soft and Semi-Rigid Stock

The Swiss imported oscillating head on this platform handles full-cut, half-cut, and cursor location without a tool change. Full-cut runs through corrugated and grey board for carton sample profiles. Half-cut scores fold lines on folding carton stock without penetrating the back liner. Cursor location registers printed marks for contour trimming on pre-printed packaging prototypes. Switching between these modes is a software call, not a mechanical swap, keeping sample turnaround tight. [NEED_CITE: oscillating knife cutting principles for packaging materials]

Reading the Spec Sheet Against Real Workshop Conditions

The 7.5 kW vacuum pump paired with the flat working table holds corrugated and flexible materials flat across the 1600 × 2500 mm area. Cutting speed ranges from 200 to 800 mm/s depending on material density and thickness, which is an honest spread — a 3 mm grey board will not cut at the same feed rate as a single-layer fabric. The HP-GL compatible instruction system accepts files from standard packaging CAD and nesting software, so buyers do not need to rebuild their digital workflow around a proprietary format. Repeated positioning accuracy of ≤ 0.1 mm keeps fold lines and cut contours aligned across long sample runs.

The Cost of Skipping a Material Trial

I once saw a buyer specify a CNC cutting table purely on working area, then discover that the configured tool head could not handle the 3 mm grey board叠瓦楞stack they ran daily. The light-duty spindle could not maintain the V-groove angle, the bearing wore out within months, and production stopped while waiting for replacement parts. That failure was entirely preventable with a sample cut on the buyer’s actual material before the order was confirmed. Skipping the trial saves days upfront and costs weeks later. [NEED_CITE: tooling selection for corrugated and composite board cutting]

Why Procurement Teams Source This Platform Here

In-house design covers both knife and laser technologies, so the cutting method is matched to the material, not forced. Tool head, vacuum table, and auto-feeding configuration are specified per declared material and daily volume. Voltage, plug type, and control language are confirmed and documented before production starts. The factory runs a full cutting test on the buyer’s sample material and shares the report before shipment. CE declaration and electrical schematics ship with every unit, supporting import compliance in regulated markets.

Documentation & Verification

• Machine specification sheet with RT-D2516/RT-S2516 electrical schematic and confirmed voltage
• Factory test record showing cutting results on your declared material and thickness
• Tool head and table configuration list matched to your material type and daily volume
• HP-GL software licence and file format compatibility note for your existing CAD workflow
• CE declaration and packing photographs provided before container loading

Installation, Commissioning & Support

• Flat floor with level tolerance suitable for the 3450 × 2300 × 1250 mm footprint and 9 kW load
• Dedicated 380 V ± 10 % circuit with confirmed plug type and frequency for your market
• Auto-feeding conveyor belt tensioned and aligned during on-site commissioning
• Vacuum pump and table zoning tested on your material to confirm hold-down across the full bed
• Operator training covering HP-GL file import, tool head mode switching, and daily maintenance
• Spare parts list covering oscillating knife blades, vacuum seals, and synchronous belt sections

What to Include in Your Inquiry

Send the material type, maximum sheet thickness, and typical sheet dimensions so the correct tool head and vacuum zoning can be specified. Confirm your local voltage, frequency, and preferred control language to avoid commissioning delays. If you run specific packaging CAD software, share a sample file so HP-GL compatibility is verified before the order.

Frequently Asked Questions

Q: How is voltage, plug type, and control language confirmed before shipment?
A: Before production begins, we issue a voltage and plug confirmation document listing the exact supply specification for your facility. The control interface language is set at the factory and verified during the pre-shipment test run. Any deviation is corrected before the RT-D2516/RT-S2516 is crated.

Q: What OEM scope is available for distributors and importers?
A: Distributors can request custom branding on the machine frame, control interface, and documentation package. Electrical specifications and safety labelling are adapted to the destination market. OEM configuration details are confirmed in writing before the production order is released to the assembly line.

Q: How does the factory verify build quality before dispatch?
A: Each unit undergoes a full mechanical inspection covering rail alignment, belt tension, and servo tuning. A cutting test runs on material matching the buyer’s declared application. The factory test record, including dimensional checks and cut samples, is shared with the buyer before packing.

Q: Can I receive sample cutting results on my material before ordering?
A: Yes. Send a representative sample of your material and the desired cut profile. The factory runs the test on a machine configured to the same specification as your order and provides a sample cutting report showing edge quality, dimensional accuracy, and achievable cutting speed.

Q: What documentation ships with the machine?
A: The documentation package includes the machine specification sheet, electrical schematic, CE declaration, operation and maintenance manual, software licence note, spare parts list, and packing photographs. All documents reference the specific RT-D2516/RT-S2516 serial number assigned to your unit.