Corrugated Carton Box Cutting Machine – OEM Available

Tool head and table configuration specified per material and production volume — the RT-D2516 is configured after reviewing your actual board grade, flute profile and daily sheet count, rather than shipped as a fixed catalogue spec.

Technical Specifications

Application Suitability

Why the Wrong Flute Profile Assumption Wastes Your First Blade Set

A cutting table that runs perfectly on B-flute will crush E-flute or leave ragged edges on double-wall if the tool head and vacuum zoning are never rechecked against your actual stock.

I learned this the hard way after a Middle Eastern customer ordered a carton sample table based on corrugated board samples they mailed us. We tuned the oscillation frequency and blade depth for that material, shipped the machine, and within a week the operator reported crushed edges and blades going dull every two days. It turned out their daily production used a completely different high-density grey board. Since then, every order I handle requires a second round of sample cutting on the exact material the buyer actually runs in production. A CNC digital carton cutting table manufacturer that skips this step is leaving your first month of blade consumption to chance. [NEED_CITE: oscillating knife wear rates across corrugated and dense board grades]

What the Drive Train Actually Means for Your Crease Lines

The combination of Yaskawa digital servo motors with Hiwin linear rails and ball screw transmission delivers repeated accuracy within 0.1 mm across the full 1600 × 2500 mm working area. For carton sample making, this tolerance matters most on crease lines that must align with cut edges after folding. When a creasing wheel drifts even fractionally across a long panel, the resulting box will not square up on the packing line.

Vacuum Hold-Down Sizing for Small Parts and Full Sheets

The 7.5 kW vacuum pump paired with the flatbed table and Germany-imported auto-feeding conveyor provides the hold-down force needed for both large corrugated sheets and small sticker contours. Without sufficient vacuum zoning, lightweight cut parts lift off the table at higher translational velocities, causing the oscillating knife to skip or produce incomplete cuts. This is especially common when a single job nests small label shapes alongside full-size carton blanks. [NEED_CITE: vacuum table zoning requirements for mixed-size nesting on digital cutting tables]

Reading the Specs That Actually Affect Your Daily Output

The Swiss-imported oscillating knife on the multifunctional head handles full cutting, half cutting and cursor location in a single setup, which means corrugated box prototypes with both through-cuts and perforated fold lines do not require a tool change mid-job. The translational velocity range of 800 to 1200 mm/s sets the travel speed between cuts, while actual cutting speed depends on board density and thickness. The pneumatic cutting tool option extends capacity up to 70 mm for dense gasket materials and thick foam boards that the standard oscillating knife cannot penetrate cleanly. HP-GL instruction format compatibility means your existing packaging design software can drive the table without an intermediate conversion step, provided the file format is verified before the order is finalized.

What Happens When Configuration Is Skipped

When a buyer selects a CNC digital carton cutting table based on working area alone without specifying the tool head for their material, the consequences show up within the first production week. Ragged edges on grey board mean the sample cannot be presented to the client for approval. Crushed flute on corrugated board weakens the box structure and leads to failed compression tests. Insufficient vacuum zoning causes small nested parts to shift mid-cut, producing scrap that could have been avoided with the correct zone configuration confirmed before build. [NEED_CITE: material-specific tool head selection for oscillating knife cutting tables]

Why Buyers Source This Machine From the Core Factory

The RT-D2516 is designed and built in-house, covering both the knife cutting and creasing functions on a single table frame rather than assembling sourced sub-assemblies. The tool head and table configuration are matched to the buyer’s specific board grade, flute profile and daily volume before production begins. Sample cutting on the buyer’s own corrugated or grey board material is completed and documented before the machine is cleared for shipment. Voltage, control language and software file format compatibility are confirmed against the target market requirements, not assumed from a default build sheet. The factory test record travels with the machine so the buyer can verify every subsystem performed against the agreed specification.

Documentation & Verification

• Machine specification sheet listing the exact tool head, vacuum pump and conveyor configuration for your order
• Electrical schematic with voltage and frequency confirmation matched to your facility supply
• Sample cutting report produced on your corrugated board grade and flute profile before dispatch
• Tool head and table configuration list tied to your material type, thickness and daily volume
• Software licence and HP-GL file format compatibility note for your existing packaging design workflow
• Factory test record covering repeated accuracy, vacuum hold-down and full-cut / half-cut verification

Installation, Commissioning & Support

• Floor space of at least 3450 × 2300 mm with level concrete substrate for the RT-D2516 flatbed frame
• Dedicated 380V ±10% circuit with sufficient capacity for the combined 9 kW machine and 7.5 kW vacuum pump load
• Machine ships fully assembled; conveyor belt tension and vacuum zone seals checked on arrival
• First-run parameter tuning on your actual corrugated and grey board stock during commissioning
• Operator training covering tool head changeover, creasing wheel setup and HP-GL file import workflow
• Spare blade and consumable list provided with recommended reorder intervals based on your material mix

What We Need to Configure Your Table

Send us the specific corrugated board grades and flute profiles you run most often, along with typical sheet sizes and whether you also cut stickers or dense grey board on the same table. Confirm your facility voltage, frequency and the control language your operators need. If you already use packaging design software, share a sample file so we can verify HP-GL compatibility and nesting workflow before the build starts.

Frequently Asked Questions

Q: How can I verify cutting and creasing quality on my specific board grade before committing?
A: We run sample cuts on the exact corrugated board or grey board you send us, using the tool head and vacuum configuration proposed for your order. You receive a sample cutting report documenting edge quality, crease alignment and blade wear observed during the test, so you can evaluate results before production begins.

Q: What electrical and language details must I confirm before the machine ships?
A: We need your facility voltage, frequency and phase specification, along with the control interface language your operators require. The RT-D2516 is configured for 380V ±10% as standard, but alternative electrical configurations are available. All details are documented on an electrical confirmation sheet before the build starts.

Q: Which tool head setup works if I cut both large carton sheets and small sticker parts?
A: The multifunctional head with Swiss oscillating knife handles full cutting, half cutting and creasing in one setup. For small sticker parts, vacuum table zoning must be configured to prevent lifting at higher speeds. We specify the zone layout based on the smallest part dimension in your typical nesting jobs.

Q: Can the working area, conveyor and tool options be customized for my production needs?
A: Yes. Working area dimensions, conveyor belt specification, vacuum pump capacity and tool head configuration are all adjustable within the OEM range. We scope each option against your material type, sheet size and daily volume, then document the final configuration before production begins.

Q: What does installation support include once the machine arrives at my facility?
A: The RT-D2516 ships fully assembled. Commissioning includes first-run parameter tuning on your actual board stock, operator training on tool head setup and software workflow, and verification of repeated accuracy on site. Ongoing after-sales support covers troubleshooting, consumable supply and spare parts fulfillment from the factory.