Cardboard Digital Cutting and Creasing Machine – OEM Available

Configured per Material — We match the cutting method, tool head and vacuum zoning to your actual carton stock rather than quoting a generic working area.

Technical Specifications

Application Suitability

Why "Working Area" Is the Wrong Starting Point for Digital Cutting and Creasing Machine Buyers

Specifying a flatbed cutter by table size alone leaves the tool head, vacuum zoning and cutting speed to chance.

Many buyers request a 1600×2500 mm table and assume the machine will handle their material. I learned the hard way that a machine configured for standard grey board can struggle when the actual stock is high-density corrugated. The knife pressure may fall short, leaving crushed flutes and ragged edges. [NEED_CITE: common causes of edge quality failure in digital flatbed cutting]

This Digital Cutting and Creasing Machine is configured based on your specific flute profile and grammage. We verify the cutting method and tool head selection against your actual material before the order is finalized.

Tool Head and Creasing Wheel Configuration

The Swiss imported oscillating knife head supports vibration full cutting, half cutting and cursor positioning. This allows a folding carton workflow where creasing and cutting happen on the same table without manual tool changes. The included creasing wheel handles marking and scoring for precise fold lines on corrugated and solid board.

Vacuum and Conveyor Integration

A 7.5 kW vacuum pump paired with a German-imported conveyor belt provides continuous sheet handling. The auto-feeding system moves material through the cutting zone while the vacuum table holds the sheet flat. Vacuum zoning configuration must be confirmed to ensure small carton blanks remain secure during high-speed cutting. [NEED_CITE: vacuum table zoning requirements for small part retention]

Servo and Motion Precision

Japanese Yaskawa digital servo motors and Taiwan Hiwin linear guides deliver ≤0.1 mm repeatability across the entire 1600×2500 mm working area. The digital servo system maintains positional accuracy during complex carton crease-and-cut patterns, where cumulative error would cause misalignment between score lines and cut edges. This precision is critical for packaging sample makers producing short-run folding cartons where fit and finish matter.

What Happens When the Specification Misses the Material

I once saw a machine specified for standard cardboard fail when the customer switched to double-wall corrugated. The knife pressure wasn’t sufficient, and the cutting speed was too high for the material density. The result was incomplete cuts and crushed edges. [NEED_CITE: relationship between corrugated flute type and required cutting force] This is why we run sample cuts on your actual stock before commitment.

Why Source from a Manufacturer That Builds Both Knife and Laser Systems

Our in-house design and production covers both oscillating knife and laser cutting technologies. This means we can match the cutting method to your material rather than forcing one solution. We provide a sample cutting report on your specific cardboard stock and thickness before you commit. The tool head and creasing wheel configuration list is matched to your flute profile. Electrical schematics include voltage and frequency confirmation for your target market. Software compatibility notes confirm HP-GL or your native CAD format import. [NEED_CITE: CE machinery directive requirements for industrial cutting equipment]

Documentation & Verification

• Machine specification sheet with confirmed tool head and table configuration for your material type
• Electrical schematic with voltage and frequency confirmation matching your facility requirements
• Sample cutting report on your actual cardboard stock and thickness before order commitment
• Factory test record demonstrating cutting and creasing performance on your specified flute profile
• Software licence and file format compatibility note confirming HP-GL or your native CAD import

Installation, Commissioning & Support

• 3450×2300×1250 mm overall dimensions require floor space assessment and level concrete foundation
• 9 kW rated power plus 7.5 kW vacuum pump require dedicated 380V ±10% circuit with proper grounding
• Fully assembled flatbed table shipped with protective crating for the linear guides and conveyor belt
• First startup includes parameter setting for your specific material thickness and cutting speed verification
• Operator training covers oscillating knife and creasing wheel tool changes and vacuum zone adjustment
• Spare parts list includes Swiss knife blades, creasing wheels, and conveyor belt wear components

Before You Request a Quote

Provide your material type, flute profile, grammage and typical sheet dimensions. Specify your target market voltage and frequency requirements. Let us know your preferred control panel language and whether you need CCD camera positioning for printed contour work. If you have existing CAD files, share the format so we can confirm software compatibility.

Frequently Asked Questions

Q: How is cutting speed verified against specific cardboard flute type and thickness?
A: We run sample cuts on your actual material stock before the order is finalized. The cutting speed range of 200–800 mm/s is adjusted based on the material density and required edge quality. You receive a sample cutting report documenting the parameters used and the resulting edge finish.

Q: Can the vacuum table zoning hold small carton blanks flat during high-speed cutting?
A: The 7.5 kW vacuum pump provides sufficient suction, but zoning configuration must be matched to your typical blank size. We confirm the vacuum zone layout during the specification phase to ensure small parts remain secure without lifting during the cutting cycle.

Q: Is CCD camera contour recognition available for printed packaging sample registration?
A: CCD camera availability must be confirmed during the inquiry phase. If your workflow requires tracking printed marks for contour cutting, specify this requirement so we can include the appropriate camera system and verify its performance at your production speed.

Q: What file formats does the control software accept beyond HP-GL?
A: The standard instruction system is HP-GL compatible. If you use DXF, PLT, AI or other formats in your packaging CAD workflow, confirm this during the specification phase so we can verify software compatibility and provide a file format compatibility note.

Q: How are voltage, plug type and control panel language confirmed before shipment?
A: We request your facility voltage and frequency requirements during the inquiry phase. The electrical schematic is prepared with your specifications, and control panel language options are confirmed before production begins to ensure the interface matches your operator requirements.