Automatic Carton Box Cutting Machine 1625 | OEM Available

Factory-Built Configuration — every tool head and vacuum zone on the 1625 is specified against your actual packaging material sample, not a generic catalogue assumption.

Technical Specifications

Application Suitability

Why the Tool Head Question Should Come Before the Working Area

A machine specified on table size alone will fail the moment your material thickness or flute profile exceeds what the default knife can handle.

I have seen packaging producers receive a machine with the right bed dimensions but the wrong cutting head, resulting in crushed E-flute corrugated or ragged edges on high-density greyboard. The cutting method and tool head must match your exact material stack before the order is placed. A CNC oscillating knife cutting machine manufacturer that does not ask for your material samples is selling a table, not a solution. [NEED_CITE: corrugated flute classification and crushing force thresholds]

Matching the Tool Head to Your Packaging Material

The 1625 carries seven interchangeable tool heads — oscillating knife, driven rotary knife, creasing wheel, kiss cutting tool, pneumatic knife, milling tool, and V groove knife — each suited to a different packaging material behavior. Corrugated board requires oscillating or driven rotary action to slice cleanly through flutes without crushing, while greyboard and dense cardstock respond better to pneumatic knife pressure. Creasing wheels score fold lines on carton stock, and V groove knives cut channels for rigid box construction. Selecting the correct head eliminates the need for secondary finishing and prevents material waste.

Vacuum Table Zoning for Small Packaging Parts

The aluminum bellows vacuum table provides full-surface adsorption across the 1600×2500 mm working area, holding small carton blanks and intricate packaging inserts flat during high-speed cuts. Without adequate vacuum zoning, lightweight corrugated pieces lift off the bed under the oscillating knife’s lateral force, producing dimensional errors or jamming the tool head. The 9 kW vacuum pump maintains consistent hold-down even when cutting nested layouts with narrow offcuts. [NEED_CITE: vacuum hold-down requirements for flatbed digital cutting of thin packaging stock]

Reading the Specification Sheet Against Your Production Reality

Cutting accuracy of ±0.1 mm across the full 1600×2500 mm envelope depends on the servo drive selection — Panasonic, Delta, or Dorna options are available, each with different torque characteristics that affect acceleration on dense materials. The 0-1500 mm/s cutting speed range is a mechanical limit; actual throughput depends on material thickness, flute count, and contour complexity. A 40 mm maximum cutting thickness covers most packaging foams and multi-layer corrugated stacks, but denser composites may require reduced speed to maintain edge quality. The dedicated packaging box structure design software accepts PLT, DXF, AI, and PDF files, and language options on the PLC control panel can be set before shipment to match your operator team.

What Happens When Configuration Is Skipped

Choosing a machine without testing your actual material leads to predictable failures: crushed flutes on corrugated board when the oscillating frequency is too low, incomplete kiss cuts on adhesive-backed laminates, and vacuum lift on small nested carton parts that ruins registration. I once configured a line where the buyer specified working area only — when their real production material arrived, the standard knife head could not penetrate high-GSM greyboard without buckling the sheet. [NEED_CITE: material thickness versus tool pressure requirements in flatbed cutting]

Why Source the 1625 from This Production Line

The 1625 is designed and built in-house, covering both knife cutting technologies so your packaging material dictates the method rather than forcing one approach across all materials. Tool head and table configuration are specified per your material type and production volume, confirmed against physical samples cut on our floor before you commit. Electrical schematics and voltage — 110V, 220V, or 380V — are matched to your facility’s supply and documented before the machine enters assembly. Software compatibility with your existing PLT, DXF, AI, or PDF workflow is verified during the sample cutting stage, not discovered at installation.

Documentation & Verification

• Machine specification sheet listing the exact tool heads and vacuum zones configured for your material
• Electrical schematic with voltage and frequency confirmed against your local power supply
• Sample cutting report on your packaging board, foam, or composite stock before order confirmation
• Software licence and file format compatibility note for PLT, DXF, AI, and PDF workflows
• Factory test record documenting cutting accuracy across the 1600×2500 mm bed with your chosen servo option
• Operation and maintenance manual in your selected control language

Installation, Commissioning & Support

• Foundation must support the 3300×2100×1350 mm footprint and dynamic load of the heavy-duty frame during acceleration
• Dedicated power circuit required matching confirmed voltage (110V, 220V, or 380V) and the 9 kW vacuum pump draw
• Machine ships with tool heads pre-mounted; on-site assembly covers leveling the aluminum bellows vacuum table
• First-run parameter setting includes oscillating frequency, vacuum zoning, and PLC interface calibration per material
• Operator training covers tool head changeover between corrugated, foam, and composite jobs on the 1625
• Spare parts list covers knife blades, creasing wheels, and vacuum seals specific to your configured tool heads

Before You Request a Quotation

Send us the exact packaging materials you intend to cut — flute type and GSM for corrugated, density for foam, thickness for greyboard and composites — along with your typical sheet dimensions and daily output volume. Specify your local voltage and frequency, the control language your operators require, and the file formats your design team currently uses. We will run sample cuts on your material and return a configuration recommendation before any commercial discussion begins.

Frequently Asked Questions

Q: How is the cutting tool head selected for my specific corrugated flute or foam density?
A: We cut samples of your actual material using different tool heads — oscillating, driven rotary, pneumatic — and evaluate edge quality, flute integrity, and cutting speed. The head that produces the cleanest result on your specific flute profile or foam density is locked into the configuration sheet before the order is confirmed.

Q: What voltage and control language options are confirmed before shipment?
A: Voltage is selectable across 110V, 220V, and 380V, and the PLC control panel language can be set to English, Russian, Italian, Chinese, or a custom language. Both are documented in the electrical schematic and confirmed against your facility specifications before the machine enters final assembly.

Q: Can I send my packaging material for sample cutting before placing the order?
A: Yes. We require physical samples of your corrugated board, greyboard, foam, or composite stock. We run cutting tests across the relevant tool heads, document edge quality and achievable speed, and provide a sample cutting report so you can evaluate results on your own material before commitment.

Q: How does the vacuum table zoning handle small carton parts at production speed?
A: The aluminum bellows vacuum table provides full-surface adsorption across the 1600×2500 mm area, with zoning that maintains hold-down on small nested parts even during high-speed oscillating cuts. The 9 kW pump ensures consistent suction so lightweight carton blanks do not lift or shift during cutting.

Q: What software file formats are compatible with my existing packaging design workflow?
A: The dedicated packaging box structure design software accepts PLT, DXF, AI, and PDF profiles. We verify compatibility with your existing design files during the sample stage and document any required export settings in the software licence and file format compatibility note provided with the machine.